Products & Services - Wet-pour Safety Surfacing

Play Services use a wetpour EPDM (Ethylenepropylene Diene Modified) rubber system. This is a durable, porous and soft cushioned surface. Harnessing the latest technology, wet pour rubber consists of synthetic EPDM rubber granulate bound in polyurethane resin to form a continuous, seamless surface.
Wet pour rubber can also be useful in other areas: Sports and leisure facilities, theme parks, garden patios, driveways and pathways. Play Services can also incorporate coloured shapes or themes into the safety surface.

Critical Fall Height to BSEN1177
CFH refers to the height of any equipment used on a play surface. When planning a play area it is also very important to consider the surfaced area around any equipment being used.

Installation of Safety Surface

Finished levels will be the same as existing ground levels where possible. Where the area of groundwork must be installed on an incline, the slope will not exceed 1:10.To comply with the European Standard and British Standard BS1177, the internal measurements of the surfacing will extend to a minimum of 1m beyond any extremity of the playground equipment. Excavation to a minimum of 150mm plus the proposed overall depth of safety surface. A minimum 150mm depth of compacted M.O.T. type one stone will be laid.

Home Page | About Us | Products & Services | E-Mail Us | Contact Details

Play Services Limited
Unit 1, Advance Park, Park Road
Rhosymedre, Wrexham, LL14 3YR
United Kingdom

t: +44 (0)1978 822504     f: +44 (0)1978 823860
e: contact@playservices.co.uk

site developed by notcon internet